ZKTeco SC800 User Manual

SC800 User Manual
Page | 44 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Wiegand36
OFFFFFFFFFFFFFFFFCCCCCCCCCCCCCCCCMME
It consists of 36 bits of binary code. The 1
st
bit is the
odd parity bit of the 2
nd
to 18
th
bits, while the 36
th
bit
is the even parity bit of the 19
th
to 35
th
bits. The 2
nd
to
17
th
bits is the device codes. The 18
th
to 33
rd
bits is the
card numbers, and the 34
th
to 35
th
bits are the
manufacturer codes.
Wiegand36a
EFFFFFFFFFFFFFFFFFFCCCCCCCCCCCCCCCCO
It consists of 36 bits of binary code. The 1
st
bit is the
even parity bit of the 2
nd
to 18
th
bits, while the 36
th
bit
is the odd parity bit of the 19
th
to 35
th
bits. The 2
nd
to
19
th
bits is the device codes, and the 20
th
to 35
th
bits
are the card numbers.
Wiegand37
OMMMMSSSSSSSSSSSSCCCCCCCCCCCCCCCCCCCE
It consists of 37 bits of binary code. The 1
st
bit is the
odd parity bit of the 2
nd
to 18
th
bits, while the 37
th
bit
is the even parity bit of the 19
th
to 36
th
bits. The 2
nd
to
4
th
bits is the manufacturer codes. The 5
th
to 16
th
bits
is the site codes, and the 21
st
to 36
th
bits are the card
numbers.
Wiegand37a
EMMMFFFFFFFFFFSSSSSSCCCCCCCCCCCCCCCCO
It consists of 37 bits of binary code. The 1
st
bit is the
even parity bit of the 2
nd
to 18
th
bits, while the 37
th
bit
is the odd parity bit of the 19
th
to 36
th
bits. The 2
nd
to
4
th
bits is the manufacturer codes. The 5
th
to 14
th
bits
is the device codes, and15
th
to 20
th
bits are the site
codes, and the 21
st
to 36
th
bits are the card numbers.

ZKTeco SC800 Specifications

General

Brand	ZKTeco
Model	SC800
Category	IP Access Controllers
Language	English