SC800 User Manual
Page | 101 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Rights
Set the role for the user as either Normal User or
Super Admin.
Super Admin: The Super Admin owns all
management privileges in the WebServer.
Normal User:
already registered in the WebServer, then
the Normal Users will not have the
privileges to manage the system and can
only access authentication verifications.
Password
Set the user's registration password.
Card Number
Enter the card number manually, after
registering the user's card number, the user can
swipe the card for verification. Also can click
Register, and the device will display the card
registration interface in real time, swipe the card
underneath the card reading area. The
registration of the card will be successful.
Access Control Role
The Access Control Role sets the door access
privilege for each user, new users will be added
to Group 1 by default, which can be reassigned
to other required groups. The system supports
up to 10 access control groups.
Note:
1. During the initial registration, you can modify your ID; you cannot be
modifying the registered ID once after the successful registration.
2. If the message "Setup failed!" pops up, you must choose a different User ID
because the one you entered already exists.
To Next Page
Loading...
Need help?
General
