ZKTeco SC800 User Manual

SC800 User Manual
Page | 12 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
experienced technical personnel.
Note:
 Make sure whether the positive polarity and negative polarity of the DC
12V power supply is connected correctly. A reverse connection may
damage the device. It is not advisable to connect the AC 24V power supply
to the DC 12V input port.
 Make sure to connect the wires following the positive polarity and negative
polarity shown on the device's nameplate.
 The warranty service does not cover accidental damage, damage caused by
incorrect operation, and damage due to independent installation or repair
of the product by the user.

ZKTeco SC800 Specifications

General

Brand	ZKTeco
Model	SC800
Category	IP Access Controllers
Language	English