SC800 User Manual
Page | 58 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
New Bell Schedule:
Tap New Bell Schedule on the Bell Schedule interface to add a new bell
schedule.
Function Description
Function Name Description
Bell Status
Toggle to enable or disable the bell status.
Bell Time
Once the required time is set, the device
automatically triggers to ring the bell during
that time.
Repeat
Set the required number of counts to repeat the
scheduled bell.
Ring Tone
Select a ringtone.
Internal Bell Delay(s)
Set the replay time of the internal bell. Valid
values range from 1 to 999 seconds.
All Bell Schedules:
Once the bell is scheduled, on the Bell Schedules interface, tap All Bell
Schedules to view the newly scheduled bell.
To Next Page
