Other settings
Testing SD card performance
109
H5 Handy Recorder
5. When the amount of
time required is shown,
use
to select “YES",
and press
.
When the test completes,
if the MAX access rate is
100%, the card has failed
the test (NG).
6. To cancel testing, press .
HINT
You can also press
to pause and resume testing.
NOTE
Even if an SD card is evaluated as “OK” by the perfor-
mance test, this does not guarantee that write errors will
never occur. Please use this test just as a guide.
To Next Page
Loading...
