Zoom H5 User Manual

Tools
Converting input MS signals to stereo
86
This unit can convert MS stereo mic signal input through Inputs 1/2 into ordinary L/R stereo signals.
1. Press .
2. Use to select “IN/OUT", and press .
MULTI FILE mode STEREO FILE mode
3. Use to select
“In1/2 MS MATRIX",
and press
.
4. Use to select an
item, and press
.
■ Turn "ON/OFF"
Use
to select “ON",
and press .
NOTE
•
When ON, tracks 1/2 will be reconfigured as a stereo
track.
•
This function cannot be used at the same time as the
MONO MIX function. When MONO MIX is turned ON,
MS STEREO MATRIX will be disabled.
Converting input MS signals to stereo
Input 1/2 only

Zoom H5 Specifications

General

G-shock sensor	No
Number of cameras	1
Sample rate	96 kHz
Audio quality	24 bit
Audio recording	Yes
Microphone sensitivity	45 dB
Compatible memory cards	SD, SDHC
Power source type	Battery
Product color	Black
Microphone maximum input	140 dB SPL
Microphone input impedance	2000 Ω
Interface	1/8\
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.

Weight and Dimensions

Depth	135.2 mm
Width	66.8 mm
Height	42.1 mm
Weight	176 g