USB functions
Data exchange with computers (card reader)
70
1. Press .
2. Use to select
“USB", and press
.
3. Use to select “SD
CARD READER", and
press
.
4. Connect the to the computer using a USB
cable.
NOTE
•
If you want to power the
using the computer’s
USB bus, connect the cable while the recorder is off and
then turn it on.
•
The following operating systems are supported.
• Windows Vista or later
• Mac OS X 10.6 or later
Data exchange with computers (card reader)
By connecting with a computer, you can check and copy data on the SD card.
To Next Page
Loading...
