Other settings
Adjusting the input level (compressor/limiter)
94
Adjusting the input level (compressor/limiter)
1. Press .
2. Use to select “IN/OUT", and press .
MULTI FILE mode
STEREO FILE mode
3. Use to select
“COMP/LIMITER", and
press
.
The unit can automatically raise low-level input signals and lower high-level input signals.
4. Use to select the Input to adjust,
and press
.
MULTI FILE mode
STEREO FILE mode
HINT
Select ALL to use this on all the inputs at once.
5. Use to select the
COMP/LIMITER type, and
press
.
NOTE
The COMP/LIMITER is not used on backup recordings.