Recording
Backup recording
32
4. Use to select “ON",
and press
.
NOTE
•
If the name of the original file is, for example,
“ZOOM0001_TrLR.wav”, the name of the backup file will
be “ZOOM0001_TrLR_BU.wav”.
•
A backup file will not be created if the L/R input is not
selected.
•
The LO CUT and COMP/LIMITER settings will not affect
the backup recording.
•
To play a backup recording file, select and play the file
with "_BU" added to the end of the file name. (For MULTI
FILE mode, see step 12 → P. 35. For STEREO FILE
mode, see→ P. 40.)
HINT
Using backup recording will increase the amount of SD
card space used.
Backup recording
1. Press .
2. Use to select “REC", and press .
MULTI FILE mode
STEREO FILE mode
3. Use to select
“In L/R BACKUP", and
press
.
When using the L/R input, in addition to the recording at the set input level, the recorder can also record a separate file at a
level 12dB below. This backup can be used if the recording level was set too high, causing distortion, for example.
L/R input only
(with 44.1/48kHz WAV only)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
