Zoom H5 - H5 Handy Recorder: Recording Aids; Setting Up Pre-Record Count-in

Recording
Counting in before recording
30
4. Use to select
“PRE COUNT", and
press
.
5. Use to select the
precount number, and
press
.
NOTE
•
This cannot be used at the same time as the AUTO REC
function. When AUTO REC is turned ON, PRE COUNT
will be disabled.
•
This cannot be used at the same time as the PRE REC
function. When PRE COUNT is turned ON, PRE REC will
be disabled.
•
The count can be set to 1–8 or SPECIAL. Set to SPECIAL,
the precount will use the following pattern.


     
Counting in before recording
1. Press .
2. Use to select
“TOOL", and
press
.
3. Use to select
“METRONOME", and
press
.
A count in can be set to play before starting recording.