Zte ZXR10 ZSR V2 - Page 78

ZXR10ZSRV2CongurationGuide(IPv6)
CommandFunction
ZXR10(config-ospfv3-process-id)#summary-prefix
<X:X::X:X/<0-128>>
Summariestheroutesofother
protocolsthatareredistributed
toOSPF.
<protocol>:speciesthenameoftheredistributedprotocol,suchas“connected”,
“static”,“rip”,“bgp”,“isis”,“iaftr”,“isf-nat64”,“isl-nat64-ipv6”or“isubscriber-host.
<metric-value>:speciesthemetricoftheredistributedLSA.Bydefault,range:
1-16777214.
<type>:speciesthemetric-typeoftheredistributedLSA,range:ext-1orext-2,default:
ext-2.
tag<number>:setsatagforarouteredistributedtoOSPF .Range:0–4294967295.
Default:0.
4.CongureOSPFv3routeloadsharing.
StepCommandFunction
1ZXR10(config-ospfv3-process-id)#maximum-paths
<number>
Conguresthenumberof
routessupportedbythe
protocolforloadsharing,
range:1–32,default:1.
Upto32equal-costroute
entriescanbestoredin
theroutingtableforload
balancing.Thiscommand
cancongureupto32paths
withthesamemeasurement
value.
2ZXR10(config)#interface<interface-name>Entersinterface
congurationmode.
3ZXR10(config-if-interface-name)#load-sharing
bandwidth<bandwidth-value>
Congurestheweightfor
interfaceloadsharing.
lTheweight,whichisset
onanoutgoinginterface,
cannottakeeffectuntil
thepriorityiscongured.
lInterfaceswithdifferent
weightshavedifferent
bandwidthvalues.
5.CongureOSPFv3interfaceattributes.
6-8
SJ-20140504150128-018|2014-05-10(R1.0)ZTEProprietaryandCondential