Chapter 20 Classifier
VES1724-56 User’s Guide
195
Click Advanced Application > Classifier in the navigation panel to display the configuration
screen as shown.
Figure 119 Advanced Application > Classifier
The following table describes the labels in this screen.
Table 81 Advanced Application > Classifier
LABEL DESCRIPTION
Active Select this option to enable this rule.
Name Enter a descriptive name for this rule for identifying purposes.
Packet
Format
Specify the format of the packet. Choices are All, 802.3 tagged, 802.3 untagged, Ethernet II
tagged and Ethernet II untagged.
A value of 802.3 indicates that the packets are formatted according to the IEEE 802.3 standards.
A value of Ethernet II indicates that the packets are formatted according to RFC 894, Ethernet II
encapsulation.
To Next Page
Loading...
