ZyXEL Communications VES1724-56 - Page 338

Chapter 37 Access Control
VES1724-56 User’s Guide
338
HRinformati
on
cpualarmEventOn 1.3.6.1.4.1.890.1.5.12.46.27.2.
1
This trap is sent when the amount of CPU
usage goes over the CPU utilization
threshold.
cpualarmEventClear 1.3.6.1.4.1.890.1.5.12.46.27.2.
2
This trap is sent when the amount of CPU
usage goes below the CPU utilization
threshold.
packetalarmEventOn 1.3.6.1.4.1.890.1.5.12.46.27.2.
1
This trap is sent when the amount of
packet buffer usage goes over the packet
utilization threshold.
packetalarmEventClear 1.3.6.1.4.1.890.1.5.12.46.27.2.
2
This trap is sent when the amount of
packet buffer usage goes below the
packet utilization threshold.
memoryalarmEventOn 1.3.6.1.4.1.890.1.5.12.46.27.2.
1
This trap is sent when the amount of
memory usage goes over the memory
utilization threshold.
memoryalarmEventClear 1.3.6.1.4.1.890.1.5.12.46.27.2.
2
This trap is sent when the amount of
memory usage goes below the memory
utilization threshold.
Table 157 SNMP System Traps (continued)
OPTION OBJECT LABEL OBJECT ID DESCRIPTION
Table 158 SNMP Interface Traps
OPTION OBJECT LABEL OBJECT ID DESCRIPTION
linkup linkUp 1.3.6.1.6.3.1.1.5.4 This trap is sent when the Ethernet link
is up.
LinkDownEventClear 1.3.6.1.4.1.890.1.5.12.46.45.2.
2
This trap is sent when the Ethernet link
is up.
linkdown linkDown 1.3.6.1.6.3.1.1.5.3 This trap is sent when the Ethernet link
is down.
LinkDownEventOn 1.3.6.1.4.1.890.1.5.12.46.45.2.
1
This trap is sent when the Ethernet link
is down.
autonegotiatio
n
AutonegotiationFailedEvent
On
1.3.6.1.4.1.890.1.5.12.46.45.2.
1
This trap is sent when an Ethernet
interface fails to auto-negotiate with the
peer Ethernet interface.
AutonegotiationFailedEvent
Clear
1.3.6.1.4.1.890.1.5.12.46.45.2.
2
This trap is sent when an Ethernet
interface auto-negotiates with the peer
Ethernet interface.
SFP DdmiTemperatureAlarmEve
ntOn
1.3.6.1.4.1.890.1.5.12.46.45.2
7.2.1
This trap is sent when a transceiver’s
temperature goes over the “high alarm”
threshold.
DdmiTxPowerAlarmEventOn 1.3.6.1.4.1.890.1.5.12.46.45.2
7.2.1
This trap is sent when a transceiver’s
transmitted optical power goes over the
“high alarm” threshold.