173D Systems, Inc.
NOTE: The print jet will begin to heat. Once the print jet has reached
the proper temperature, the printer will prime melted material into
the refuse bin.
4. The left cartridge has been installed. Select the checkmark to continue.
NOTE: The printer will begin to heat. Wait until the printer
has nished heating and then follow the user prompts in the
touchscreen menu.
5. Insert the print jet (from the cartridge that will be mounted on the right side of the
printer) into the right print jet opening on top of the printer.
6. Rotate the print jet clockwise until the dots align. Select the checkmark to
continue.
NOTE: As you rotate the print jet, ensure the print jet tube is tucked
under the top of the printer cover.
A
To Next Page
Loading...
