3D Systems CUBE User Manual

853D Systems, Inc.
4. Select WIFI.
5. Select ADHOC.
6. Select the On/Off button to turn on the Ad Hoc connection.
7. Select the checkmark to exit the utility.
8. In Windows®, select Start > Control Panel.
9. Type network in the search box.
10. Select Network and Sharing Center.
11. Select Set up a new connection or network.
12. Select Set up a wireless ad hoc (computer-to-computer) network.
13. Select Next.
14. Follow the steps in the wizard.

3D Systems CUBE Specifications

General

Print technology	Plastic Jet Printing (PJP)
Printing material	ABS, Polylactic acid (PLA)
Number of printing colors	16
Maximum build size (WxDxH)	- mm
Plug and Play	Yes
USB version	2.0
Ethernet LAN	No
Card reader integrated	-
Product color	Silver