3D Systems ProX 800 User Manual

3D Systems, Inc.
44
2. To access the Recoat Parameter
Modications on-the-y Wizard
while the machine is idle, tap the
le in the Print Queue screen.
a. Tap the screen as shown
at right. “Job Settings”
does not contain the same
options.
b. Any job can be selected this
way and the settings can be
saved for later.
3. When you select the build using either method, you will see the
screen at the right. Select Edit Recoat Style to access the wizard.
Selecting Info will show the BTE information for that build.
4. The wizard will then open.
5. From here, the user may open
existing recoat styles and make
adjustments. The user can also
add recoat style ranges and
sweeps to existing recoat styles.
6. All modications can be reverted
by selecting Restore Ranges.
7. When you tap the Edit button next to Support Recoat Style, you will see the
dialog window at the right.
NOTE: It is not recommended to add sweeps to this range.

3D Systems ProX 800 Specifications

General

Brand	3D Systems
Model	ProX 800
Category	3D Printers
Language	English