Circle field was modified during metadata edit.
version 1.101 (April 21, 2015)
• Double solo on mic inputs and tracks (press and hold 2 solo buttons at the same time).
• Phase correlation in double Solo.
• Last phase correlation is displayed in Test/Record/Ppr Menus.
• Dante option icon in Stop Menu
• In play position, output configurations using Mix Left and Mix right stay valid.
(Recorded Mixdown down tracks are monitored on the corresponding output).
• Bug fix on
Lock up in Solo mode
Level display jittering for potentiometers and sliders
Error message starting on record immediately after startup
Page breaks in the pdf report
version 1.94 (March 23, 2015)
• User assignation is now available for rotating potentiometers.
Assignation is managed in the same way as the top panel sliders or the cantarem.
Long press on [Shift+Solo pot] to open the assignation dialog box.
• Pre fade and Post fade monitoring are available in play (press [Shift+F2] to toggle
between the two modes)
• A full duplex mode was added for talk back (during talkback,
current headset monitoring stay active)
• An external low voltage alarm can be setup into TECHNICAL SETTINGS (11V - 15V)
When alarm pops up, press ESC to ignore the message
press OK to disable external input power and switch to internal battery (if there is a
battery)
To enable external power, just unplug or switch off the external power source a few
seconds.
• CSV file format added to audio reports (PDF and ALE).
• Enhanced report tools (in audio browser page : take type filters, and target can be
defined by user)
• In copy/backup menu, reports can be managed like audio takes
• MS and mixdown tracks are automatically labelled into the PDF report track name field.
• Multiple edit is available to modify the scene number (like notes, track names …).
• Mixdowm tracks vumeters can be shifted to the right of the screen
This function is useful for a friendly interface when Mixdown tracks are located on Tracks
1&2.
(see. TECHNICAL SETTINGS / Vum. mdxn shifted for setup)
• Delay and Phantom power indicator added to the vumeter background.
• Disarmed track label color over vumeter changed to grey .
• The external Jam OK message is hidden in record position.
• User bits are grabbed automatically from incoming LTC
(see AUDIO & TIMECODE PARAMETERS / Timecode Ubits for setup).
• When the last take is deleted, monophonic files are moved to the audio trash
and on USB,SD1,SD2 the same take is definitively erased.
• Arm/Disarm track from IN GRID screen (short press [Shift+solo track].
• Erase in grid configuration (no more M1 M2 by default into the grid).
Cantar X3
77
To Next Page
Loading...
