• Delay on inputs
• Into ingrid, routing of mono post fade (P1..P24)
• Into outmaps, highlite a T1..T24 position, press shift+F5 to map post fade (P1..P24)
• Backup of a full project
• MS decoded or balanced in mixdown
• Accurate timecode is maintaibed about 20 minutes in case of Cantar power off
After Cantar power on, a green timecode indicator means the last timecode is still valid.
• Tripple shift provide of contextual help (available only in PPR & solo mic for now)
• Extended PPR duration (up to 30s at 48kHz)
• Remote rec through MDR connector/tally
• Related Fields editable
◦ Up and down key are available for meta data field navigation
◦ Right key at end of field select next field
◦ Left key at start of field select previous filed
◦ Into edit fields (OK -> validate and select next field)
◦ F4/F6 validate and close the corresponding dialog box
◦ F5 shortcut for take type indicator is available
◦ Shift+ok switch insert/overwrite mode
◦ Update play screen metadata field after edition from play screen using F4
• Bug fix on
New management of "lazy" external media (SD/USB)
Line, Aes, Dante out are included into reset factory configuration
Balance lock are saved when power off
Display limiters status
End of play on mixdown and polyphonic files
Display limiters status
Desarmed track 11 creates an empty file for this track
Firmware version loader
version 1.62 (July 22, 2015)
• Media formatting improved for better record performance specially with monophonic files
(80% faster).
• Audio file larger than 2 GB are now supported (in all cases audio files stay smaller than
4GB).
• Beep Routing to all selected outputs (Menu Audio / Beep routing)
• Track Solo button + Left Crown accessible while assignation in Play
• Reset parameters to factory settings (Menu Technical / Reset Factory)
• Attribute reset more verbose
• Bug fix on
Battery communication
Audio file size in Pdf report
Track name visibility in Previous Edit for Track count of 9 and 17
Solo track input reminder includes Ms type
version 1.61 (June 15, 2015)
• Audio stream control has been improved and new messages have been added in case of
trouble.
version 1.53 (June 12, 2015)
Cantar X3
81
To Next Page
Loading...
