ABB ACS880 - Page 367

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
1The external event generates a warning.Warning
3If the drive is modulating, the external event generates
a fault.
Otherwise, the event generates a warning.
Warning/Fault
Inactive (true) /
uint32
Defines the source of external event 4. See also
parameter 31.8 External event 4 type.
For the selections, see parameter 31.1 External event 1
source.
External event 4
source
31.7
Fault / uint16Selects the type of external event 4.External event 4
type
31.8
0The external event generates a fault.Fault
1The external event generates a warning.Warning
3If the drive is modulating, the external event generates
a fault.
Otherwise, the event generates a warning.
Warning/Fault
Inactive (true) /
uint32
Defines the source of external event 5. See also
parameter 31.10 External event 5 type.
For the selections, see parameter 31.1 External event 1
source.
External event 5
source
31.9
Fault / uint16Selects the type of external event 5.External event 5 type31.10
0The external event generates a fault.Fault
1The external event generates a warning.Warning
3If the drive is modulating, the external event generates
a fault.
Otherwise, the event generates a warning.
Warning/Fault
DI3 / uint32Selects the source of an external fault reset signal. This
signal will be observed even if it is not the active source
in the current control location (EXT1/EXT2/Local).
(A reset from the active source will be observed
regardless of this parameter.)
0 → 1 = Reset
Fault reset selection31.11
00Not selected
11Selected
2Digital input DI1 (10.2 DI delayed status, bit 0).DI1
3Digital input DI2 (10.2 DI delayed status, bit 1).DI2
4Digital input DI3 (10.2 DI delayed status, bit 2).DI3
5Digital input DI4 (10.2 DI delayed status, bit 3).DI4
6Digital input DI5 (10.2 DI delayed status, bit 4).DI5
7Digital input DI6 (10.2 DI delayed status, bit 5).DI6
10Digital input/output DIO1 (11.2 DIO delayed status, bit
0).
DIO1
11Digital input/output DIO2 (11.2 DIO delayed status, bit
1).
DIO2
Parameters 367