Voltage control
80.10 U/F curve enableConfigure u/f curve settings.
80.11 Frequency point 1...80.18 Frequency
point 8
Note: Automatic energy optimization
function should be disabled for the manual
user u/f curve to have effect.
80.21 Additive value 1...80.28 Additive value
8
Control mode
Switch to remote control by pressing the
key. Remote control is indicated by the
text “Remote” in the top pane.
Note: The ESP control program is active
only in Remote control mode.
38 Quick start-up guide
To Next Page
Loading...
