ABB ACS880 - Page 508

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
None / uint32Preselects the data to be sent as word 2 of data set 11
to the external controller.
See also parameter 61.102 Data set 11 data 2 value.
For the selections, see parameter 61.51 Data set 11 data
1 selection.
Data set 11 data 2
selection
61.52
None / uint32Preselects the data to be sent as word 3 of data set 11
to the external controller.
See also parameter 61.103 Data set 11 data 3 value.
For the selections, see parameter 61.51 Data set 11 data
1 selection.
Data set 11 data 3
selection
61.53
None / uint32See parameter 61.51 Data set 11 data 1 selection.Data set 13 data 1
selection
61.54
…………
None / uint32See parameter 61.51 Data set 11 data 1 selection.Data set 25 data 3
selection
61.74
0 / uint16Displays (in integer format) the data to be sent to the
external controller as word 1 of data set 2.
If no data has been preselected by 61.45 Data set 2 data
1 selection, the value to be sent can be written directly
into this parameter.
Data set 2 data 1
value
61.95
- / -Data to be sent as word 1 of data set 2.0...65535
0 / uint16Displays (in integer format) the data to be sent to the
external controller as word 2 of data set 2.
If no data has been preselected by 61.46 Data set 2 data
2 selection, the value to be sent can be written directly
into this parameter.
Data set 2 data 2
value
61.96
- / -Data to be sent as word 2 of data set 2.0...65535
0 / uint16Displays (in integer format) the data to be sent to the
external controller as word 3 of data set 2.
If no data has been preselected by 61.47 Data set 2 data
3 selection, the value to be sent can be written directly
into this parameter.
Data set 2 data 3
value
61.97
- / -Data to be sent as word 3 of data set 2.0...65535
…………
0 / uint16Displays (in integer format) the data to be sent to the
external controller as word 3 of data set 4.
If no data has been selected by 61.50 Data set 4 data
3 selection, the value to be sent can be written directly
into this parameter.
Data set 4 data 3
value
61.100
- / -Data to be sent as word 3 of data set 4.0...65535
- / uint16Displays (in integer format) the data to be sent to the
external controller as word 1 of data set 11.
If no data has been preselected by 61.51 Data set 11
data 1 selection, the value to be sent can be written
directly into this parameter.
Data set 11 data 1
value
61.101
- / -Data to be sent as word 1 of data set 11.0...65535
508 Parameters