ABB ACSM1 - Page 369

Application program template
369
SPEED REF SEL
3
TLF2 500 µsec (1)
24.01 SPEED REF1 SEL
(Drive value)
24.02 SPEED REF2 SEL
(Drive value)
3.01 SPEED REF1 3.02 SPEED REF2
SPEED REF MOD
4
TLF2 5 00 µsec (2)
< 24.03 SPEED REF1 IN
[ SPEED REF1 ] (6 / 3.01)
< 24.04 SPEED REF2 IN
[ SPEED REF2 ] (6 / 3.02)
< 24.05 SPEED REF 1/2SEL
(Drive value)
24.06 SPEED SHARE
(Drive value)
< 24.07 SPEEDREF NEG ENA
(Drive value)
24.08 CONST SPEED
(Drive value)
< 24.09 CONST SPEED ENA
(Drive value)
24.10 SPEED REF JOG1
(Drive value)
24.11 SPEED REF JOG2
(Drive value)
24.12 SPEED REFMIN ABS
(Drive value)
3.03 SPEEDREF RAMP IN
SPEED REF RAMP
28
TLF3 2 50 µsec (1)
< 25.01 SPEED RAMP IN
[ SPEEDREF R AMP IN ] (6 / 3.03)
25.02 SPEED SCALING
(Drive value)
25.03 ACC TIME
(Drive value)
25.04 DEC TIME
(Drive value)
25.05 SHAPE TIME ACC1
(Drive value)
25.06 SHAPE TIME ACC2
(Drive value)
25.07 SHAPE TIME DEC1
(Drive value)
25.08 SHAPE TIME DEC2
(Drive value)
25.09 ACC TIME JOGGING
(Drive value)
25.10 DEC TIME JOGGING
(Drive value)
25.11 EM STOP TIME
(Drive value)
25.12 SPEEDREF BAL
(Drive value)
< 25.13 SPEEDREF BAL ENA
(Drive value)
3.04 SPEEDREF RAMPED
Page 6 Speed Ref FWA c om pat ib ilit y level = 1.46 Firmware Library ID = 1, ver = 1.0 Stan da rd Lib r ary ID = 10000, ver = 1.1
Based on Customer Cust. Doc. No. Date
Prepared Approved Project name
Title Doc. des.
Resp. dept. Doc. No.