3 Maintenance
3.4.7. Oil change, gearbox axis 6
1413HAC027151-001 Revision: B
© Copyright 2006-2008 ABB. All rights reserved.
4. Refill the gearbox with lubricating oil.
The amount of oil to be refilled depends on the
amount previously being drained. The correct oil
level is detailed in section Inspection, oil level
gearbox axis 6 on page 106.
Art. no. and the total amount are
specified in Required equipment
on page 139.
5.
NOTE!
Don´t mix Kyodo Yushi TMO 150 with other oil types!
Detailed in section Type of oil in
gearboxes on page 122.
6. Refit the oil plug. Tightening torque: 24 Nm.
Action Note
Continued
To Next Page
Loading...
