3 Maintenance
3.4.4. Oil change, gearbox, axis 3
3HAC027151-001 Revision: B132
© Copyright 2006-2008 ABB. All rights reserved.
3.4.4. Oil change, gearbox, axis 3
Location of gearbox
The axis 3 gearbox is located in the upper arm rotational center as shown in the figure below.
xx0600002961
Required equipment
A Oil plug, filling
B Oil plug, inspection
C Oil plug, draining
Equipment, etc. Art. no. Amount Note
Lubricating oil 3HAC032140-001 2,200 ml Kyodo Yushi TMO 150
Note! Do not mix with other oil
types!
Oil exchange
equipment
3HAC021745-001 The content is defined in section
Special tools on page 266.
Oil collecting vessel - Capacity: 3,000 ml.
Standard toolkit - The content is defined in section
Standard toolkit on page 265.
Continues on next page
To Next Page
Loading...
