3 Maintenance
3.5.1. Cleaning, robot
3HAC027151-001 Revision: B146
© Copyright 2006-2008 ABB. All rights reserved.
Required equipment
Do's and don'ts!
The section below specifies some special considerations when cleaning the robot.
Always!
• Always use cleaning equipment as specified above! Any other cleaning equipment
may shorten the life of paintwork, rust inhibitors, signs, or labels!
• Always check that all protective covers are fitted to the robot before cleaning!
Never!
• Never use high pressure water cleaner or steam cleaner, when cleaning the robot!
• Never remove any covers or other protective devices before cleaning the robot!
• Never use any cleaning agents, for example compressed air or solvents, other than
those specified above!
• Never spray anything on the SMB box! It has protection class IP 54!
• Never spray connectors and similar items!
Equipment, etc. Art. no. Note
Vacuum cleaner -
Cloth with mild detergent -
Continued
To Next Page
Loading...
