NoteAction
xx1500001993
Remove the ventilation plug.
Note
The ventilation hole must be opened to let
out air during the filling process.
3
xx1500003082
Remove the base cover.4
Pull out the oil hose next to the connections
and attach the nipple. Connect the oil dis-
penser.
5
Type of oil and total amount is described
in Technical reference manual - Lubrication
in gearboxes.
Refill the gearbox with oil, by using the oil
dispenser.
Note
The amount of oil to be filled depends on
the amount previously being drained.
6
See Type and amount of oil in gearboxes
on page 140.
xx1500001992
Inspect the oil level.7
Required oil level: 58 mm ± 5 mm below
the sealing surface of the oil plug.
Remove the oil dispenser.8
Continues on next page
Product manual - IRB 8700 145
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
3 Maintenance
3.4.2 Changing oil, axis-1 gearbox
Continued
To Next Page
Loading...
