ABB IRB 8700 Series - Page 152

NoteAction
xx1500002014
Remove the oil dispenser and refit the
protection cap to the nipple of the oil filling
plug.
8
Tightening torque: 24 Nm
xx1500001995
Refit the inspection plug.9
Tightening torque: 24 Nm
xx1500001994
Refit the ventilation plug.10
DANGER
Make sure all safety requirements are met
when performing the first test run. These
are further detailed in the section First test
run may cause injury or damage on
page 27.
11
152 Product manual - IRB 8700
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
3 Maintenance
3.4.3 Changing oil in axis-2 and axis-3 gearbox
Continued