NoteAction
xx1500002021
Open the fill plug.4
xx1500002022
Open the inspection plug.5
Type of oil and total amount is detailed in
Technical reference manual - Lubrication
in gearboxes.
Refill the gearbox with oil.
Note
The amount of oil to be filled depends on
the amount previously being drained. Some
oil always remains in the gearbox after
draining.
6
See Type and amount of oil in gearboxes
on page 140.
The level is measured at the fill hole.
xx1500002022
Inspect the oil level.7
Required oil level is: 0 - 10 mm below the
oil plug hole.
See Inspecting the oil level in axis-4 sec-
ondary gearbox on page 113.
Tightening torque: 24 NmRefit the oil plugs.8
Continues on next page
162 Product manual - IRB 8700
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
3 Maintenance
3.4.5 Changing oil, axis-4 secondary gearbox
Continued
To Next Page
Loading...
