ABB IRB 8700 Series - Page 208

NoteAction
xx1500003082
Remove the base cover.2
xx1500003083
Disconnect R1.MP-A and R1.MP-B.3
Sparkplug wrench
xx1500003084
Disconnect R1.SMB.
Tip
Use a Sparkplug wrench (or similar).
xx1200000888
4
xx1500003085
Remove the two earth cables.5
Continues on next page
208 Product manual - IRB 8700
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
4 Repair
4.4.1 Removing the cable harness
Continued