ABB IRB 8700 Series - Page 226

NoteAction
xx1200001067
Refit the cable gland cover.
Note
Replace the gasket if damaged.
2
xx1200001066
Connect the motor cables.
Connect in accordance with the markings
on connectors.
3
Wipe clean o-ring and o-ring groove.4
xx1200001070
Inspect the o-ring.
Note
Replace if damaged.
5
O-ring: 3HAC054692-002
Refit the o-ring.6
CAUTION
When refitting the motor cover, make sure
none of the cables inside will be damaged!
7
Continues on next page
226 Product manual - IRB 8700
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
4 Repair
4.4.2 Refitting the cable harness
Continued