NoteAction
xx1500003100
Remove the wrist cover.
Note
Do not damage the sealing. Replace if
damaged.
Note
The position of axis-4 depends on the on-
going procedure.
2
xx1500002330
xx1500002331
Cut the cable tie that secures the axis-6
motor cable.
3
Disconnecting the axis-6 motor cables
NoteAction
DANGER
Make sure that all supplies for electrical
power, hydraulic pressure, and air pressure
are turned off.
1
Continues on next page
306 Product manual - IRB 8700
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
4 Repair
4.5.2 Replacing the wrist
Continued
To Next Page
Loading...
