NoteAction
xx1500002712
Remove the plastic plug from the back hole
of the arm housing.
3
Attach a Lifting eye to the hole in the arm
housing with a Fender washer underneath.
xx1400002196
4
Lifting eye: M12
Fender washer: Outer diameter: minimum
26 mm, hole diameter: 13 mm, thickness:
3 mm.
Roundsling 2.5 m: Lifting capacity: 2,000
kg
xx1500002713
Attach a roundsling looped to the Lifting
eye and to an overhead crane (or similar).
xx1400002599
5
Roundsling 3 m: Lifting capacity: 2,000 kg
xx1500002714
Attach a roundsling looped to the wrist and
to an overhead crane (or similar).
6
Continues on next page
362 Product manual - IRB 8700
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
4 Repair
4.5.6 Replacing the complete lower arm
Continued
To Next Page
Loading...
