NoteAction
xx1500001968
Refit the protection plug.9
Attachment screw: M10x16 8.8Apply locking liquid on the screw and se-
cure the shaft.
10
Loctite 243
xx1500001966
Preparations before refitting the parallel rod, upper end
NoteAction
xx1500002097
Remove the strap, which was used to keep
bearing, thrust washer and cover washer
in position.
1
Continues on next page
542 Product manual - IRB 8700
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
4 Repair
4.6.3 Replacing the parallel rod
Continued
To Next Page
Loading...
