NoteAction
xx1500001975
Verify that the support ring, V-ring and
spacer ring are present on the shaft. No
need to remove.
8
PalletPut the balancing device down.
Tip
Turn a pallet upside down and place the
balancing device in the opening for the
trucks forks. This will prevent the balancing
device from starting to move unexpectedly.
9
If both balancing devices shall be removed,
remove the other in the same way.
10
Refitting the balancing device
Use these procedures to refit the balancing device.
Preparations before refitting the balancing device
NoteAction
CAUTION
The balancing device weighs 200 kg.
All lifting accessories used must be sized
accordingly!
1
Mobile platform ladder
xx1500001985
Use a Mobile platform ladder (or similar),
to reach the upper end of the balancing
device.
DANGER
Do not use the robot as ladder.
2
Continues on next page
Product manual - IRB 8700 557
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
4 Repair
4.6.5 Replacing the balancing devices
Continued
To Next Page
Loading...
