NoteAction
xx1500002305
Use caution and put the balancing device
onto upper and lower shafts.
5
Locking liquid: Loctite 243
xx1500002307
Apply locking liquid on the threads of the
lock nuts.
6
Inspect that the bearings are axially
centered in the balancing device ears.
7
Tightening torque: 120 Nm
xx1500001973
Secure the balancing device with the two
lock nuts.
Note
Make sure that the V-ring and support ring
is fitted correctly.
8
Remove the lifting accessories.9
Continues on next page
560 Product manual - IRB 8700
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
4 Repair
4.6.5 Replacing the balancing devices
Continued
To Next Page
Loading...
