NoteAction
xx1500002735
Use caution and raise the balancing device
into mounting position.
2
xx1500002306
Note
Make sure the bearings are axially centered
in the balancing device ears, before putting
them on the shafts.
3
xx1500001975
Make sure that the spacer ring with V-ring
and the support ring are placed correctly
on the shafts before the balancing device
is put on the shafts.
4
Continues on next page
Product manual - IRB 8700 559
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
4 Repair
4.6.5 Replacing the balancing devices
Continued
To Next Page
Loading...
