ABB IRB 8700 Series - Page 58

Attaching the fork lift accessory set
Location of the fork lift accessory set
The fork lift accessories are located in the four corners of the base.
A
B
C
xx1400002588
CE labelA
Fork lift accessory (4 pcs)B
Screws MC6S 20x60 8.8 (2 pcs x4)C
Required tools and equipment
NoteArticle numberEquipment, etc.
3HAC053662-003Fork lift accessory set
Content is defined in section Standard
toolkit on page 833.
-Standard toolkit
Required document
NoteArticle numberDocument
Delivered with the fork lift accessory.3HAC055664-001Directions for use Fork lift ac-
cessory for IRB 8700
Preparations before attaching the fork lift accessory set
NoteAction
Note
No extra load is permitted on the
robot.
DressPack cable package can stay
fitted as long as the tool has been
removed.
Remove any tool attached on the turning disc.
Note
No tool is permitted to be fitted on the robot, when
lifting the robot with the fork lift accessory set.
1
Continues on next page
58 Product manual - IRB 8700
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
2 Installation and commissioning
2.3.1 Lifting the robot with fork lift accessory set installed
Continued