ABB IRB 8700 Series - Page 667

NoteAction
Flange sealant: Loctite 574
xx1500002357
Apply flange sealant on the motor flange.6
xx1200001135
If the motor is a new spare part, remove the cover.7
Securing the axis-1 motor
NoteAction
Guide pin, M10x150: 3HAC15521-2Fit guide pins in opposite holes.1
Always use guide pins in pairs.
CAUTION
The motor weighs 27 kg.
All lifting accessories used must be sized
accordingly.
2
Lifting accessory, motor: 3HAC14459-1.Apply the lifting accessory.3
Rotation tool: 3HAC7887-1Fit the rotation tool.4
Continues on next page
Product manual - IRB 8700 667
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
4 Repair
4.8.2 Replacing the axis-1 gearbox
Continued