ABB IRB 8700 Series - Page 675

NoteAction
O-ring: 3HAC054692-002
xx1200001070
Inspect the o-ring.
Note
Replace if damaged.
4
Wipe clean o-ring and o-ring groove.5
Refit the o-ring.6
CAUTION
When fitting the motor cover, make sure
that none of the cables inside will be dam-
aged.
7
xx1200001135
Refit the motor cover with its attachment
screws.
Note
Do not reuse the self-threading attachment
screws. Replace with standard attachment
screws or the threads will be damaged.
Note
Make sure the o-ring is undamaged and
properly fitted.
8
Make sure that the covers are tightly
sealed.
9
Continues on next page
Product manual - IRB 8700 675
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
4 Repair
4.8.2 Replacing the axis-1 gearbox
Continued