Refitting the axis-4 primary gearbox
NoteAction
CAUTION
The axis-4 primary gearbox weighs 56 kg.
All lifting accessories used must be sized
accordingly.
1
Lifting accessory:Attach the lifting accessories to the gear-
box.
2
Roundsling 2 m: Roundsling 2 m
xx1500003000
Fit the o-rings in its grooves.
Tip
Put some grease on the o-ring for a better
fitting.
3
CAUTION
Whenever parting/mating motor and gear-
box, the gears may be damaged if excess-
ive force is used.
4
Loctite 574
xx1600000073
Apply flange sealant.5
xx1500003072
Make sure that one of the M8 holes in the
gearbox, will be at twelve o'clock when
lifting the gearbox onto the guide pins.
6
Continues on next page
772 Product manual - IRB 8700
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
4 Repair
4.8.5 Replacing the axis-4 primary gearbox
Continued
To Next Page
Loading...
