NoteAction
xx1500003073
Use caution and lift the gearbox onto the
guide pins.
7
Slide the gearbox on the guide pins into
mounting position.
Note
Do not secure the gearbox at this point. It
will be secured together with the motor
flange, when the motor flange is refitted.
8
Remove the lifting accessories.9
Refitting the motor flange
NoteAction
Clean the contact surfaces on gearbox and motor
flange.
1
xx1500003074
Clean o-ring and o-ring groove on motor flange.2
Inspect the o-ring.
Note
Replace if damaged.
3
Put some grease on the o-ring and fit it into its
groove.
4
Continues on next page
Product manual - IRB 8700 773
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
4 Repair
4.8.5 Replacing the axis-4 primary gearbox
Continued
To Next Page
Loading...
