NoteAction
xx1500003075
Make sure the oil inspection glass is facing at six
o'clock before lifting the motor flange onto the
guide pins.
5
xx1500002995
Lift the motor flange onto the guide pins.6
Make sure the o-ring is in position and slide the
motor flange into position.
7
xx1600000068
Note
When the four six-hole washers are fitted, make
sure that the three holes in the gearbox are
covered.
8
Attachment screws: M12x110 12.9
Gleitmo 603 (32 pcs)
xx1500002994
Attach 30 of the 32 attachment screws with the
four six-hole washers.
9
Continues on next page
774 Product manual - IRB 8700
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
4 Repair
4.8.5 Replacing the axis-4 primary gearbox
Continued
To Next Page
Loading...
