NoteAction
xx1500002082
Examine the pinion and the splines in the
hub for damages.
5
Grease: Castrol Molub. Alloy 777-1 NG
xx1500002346
Make sure that there is enough grease on
the splines before fitting.
If not, apply 1 gram of grease.
6
Refitting the hub
NoteAction
Attachment screws: M6x110 (2 pcs)
xx1500002081
Attach two screws in opposite holes of the
hub and use them as tools to fit the hub.
1
CAUTION
Whenever parting/mating the hub pinion
and gearbox, the gears may be damaged
if excessive force is used.
2
Continues on next page
776 Product manual - IRB 8700
3HAC052853-001 Revision: F
© Copyright 2015-2018 ABB. All rights reserved.
4 Repair
4.8.5 Replacing the axis-4 primary gearbox
Continued
To Next Page
Loading...
