ABB Relion 620 Series - Web HMI

2.1.2 PCM600 and IED connectivity package version
• Protection and Control IED Manager PCM600 2.6 (Rollup 20150626) or later
• REF620 Connectivity Package Ver.2.1 or later
• REM620 Connectivity Package Ver.2.1 or later
• RET620 Connectivity Package Ver.2.1 or later
Download connectivity packages from the ABB Web site www.abb.com/
substationautomation or directly with Update Manager in PCM600.
2.2 Local HMI
The LHMI is used for setting, monitoring and controlling the protection relay. The
LHMI comprises the display, buttons, LED indicators and communication port.
Earth-fault protection
Voltage protection
Frequency protection
Ph.unbalance or thermal ov.
Synchronism OK
Breaker failure protection
CB condition monitoring
Supervision
Autoreclose in progress
Arc detected
Overcurrent protection
SG1
Enabled
SG2
Enabled
SG3
Enabled
SG4
Enabled
SG5
Enabled
SG6
Enabled
DR
Trigger
Trip Lockout
Reset
CB Block
Bypass
AR
Disable
Figure 2: Example of the LHMI
2.2.1 Display
The LHMI includes a graphical display that supports one character size. The
character size depends on the selected language. The amount of characters and
rows fitting the view depends on the character size.
1MRS757644 H
620 series overview
620 series
Technical Manual
37