ABB Relion 620 Series - Leds; Keypad

Table 2: Display
Character size
1
Rows in the view Characters per row
Small, mono-spaced (6 × 12 pixels) 10 20
Large, variable width (13 × 14 pixels) 7 8 or more
The display view is divided into four basic areas.
1 2
3 4
1 Header
2 Icon
3 Content
4 Scroll bar (displayed when needed)
Figure 3: Display layout
2.2.2 LEDs
The LHMI includes three protection indicators above the display: Ready, Start and
Trip.
There are 11 matrix programmable LEDs on front of the LHMI. The LEDs can be
configured with PCM600 and the operation mode can be selected with the LHMI,
WHMI or PCM600.
2.2.3 Keypad
The LHMI keypad contains push buttons which are used to navigate in different
views or menus. With the push buttons you can give open or close commands
to objects in the primary circuit, for example, a circuit breaker, a contactor or
a disconnector. The push buttons are also used to acknowledge alarms, reset
indications, provide help and switch between local and remote control mode.
1
Depending on the selected language
620 series overview 1MRS757644 H
38 620 series
Technical Manual