ABB Relion 620 Series - Page 97

Name Type Default Description
BI_SG_4 BOOLEAN 0 Setting group 4 is ac-
tive
BI_SG_5 BOOLEAN 0 Setting group 5 is ac-
tive
BI_SG_6 BOOLEAN 0 Setting group 6 is ac-
tive
Table 40: CONTROL input signals
Name Type Default Description
CTRL_OFF BOOLEAN 0 Control OFF
CTRL_LOC BOOLEAN 0 Control local
CTRL_STA BOOLEAN 0 Control station
CTRL_REM BOOLEAN 0 Control remote
CTRL_ALL BOOLEAN 0 Control all
Table 41: PROTECTION output signals
Name Type Description
SG_LOGIC_SEL BOOLEAN Logic selection for setting
group
SG_1_ACT BOOLEAN Setting group 1 is active
SG_2_ACT BOOLEAN Setting group 2 is active
SG_3_ACT BOOLEAN Setting group 3 is active
SG_4_ACT BOOLEAN Setting group 4 is active
SG_5_ACT BOOLEAN Setting group 5 is active
SG_6_ACT BOOLEAN Setting group 6 is active
BEH_BLK BOOLEAN Logical device LD0 block sta-
tus
BEH_TST BOOLEAN Logical device LD0 test sta-
tus
FRQ_ADP_FAIL BOOLEAN Frequency adaptivity status
fail
Table 42: CONTROL output signals
Name
Type Description
OFF BOOLEAN Control OFF
LOCAL BOOLEAN Control local
STATION BOOLEAN Control station
REMOTE BOOLEAN Control remote
Table continues on the next page
1MRS757644 H Basic functions
620 series
Technical Manual
97