KNX control elements and application parameters
Operation of "RGBW" control element“
Product manual 2CKA001473B5343
134
RGB: Used for RGB lamp.
The following supplementary parameter is available:
■
Switching On/Off via:
Options: Switch object
RGB feedback signal
The parameter is used to specify the On/Off control.
– Switch object: Setting, when the lamp contains a "Switch" object. The following
supplementary parameters are available:
■
Switched On -> preset value:
Options: Deactivated
Activated
– Deactivated: No presets are sent when the lamp is switched on.
– Activated: The stored presets are sent when the lamp is switched on.
■
Switched Off -> RGB value 0,0,0:
Options: Deactivated
Activated
– Deactivated: No RGB values are sent when the lamp is switched off.
– Activated: The RGB values (0,0,0) are sent when the lamp is switched off. This parameter is
important for lamps that do not contain a "Switch" object.
– RGB feedback: Setting when the lamp contains no "Switch" object but is switched off via
the RGB values.
To Next Page
Loading...
