KNX control elements and application parameters
Operation of "RGBW" control element“
Product manual 2CKA001473B5343
135
HSV: Used for RGB lamp.
The following supplementary parameter is available:
■
Switched On -> preset value:
Options: Deactivated
Activated
– Deactivated: No presets are sent when the lamp is switched on.
– Activated: The stored presets are sent when the lamp is switched on.
■
Switched Off -> HSV value 0,0,0:
Options: Deactivated
Activated
– Deactivated: No HSV values are sent when the lamp is switched off.
– Activated: The HSV values (0,0,0) are sent when the lamp is switched off. This
parameter is important for lamps that do not contain a "Switch" object.
– HSV feedback: Setting when the lamp contains no "Switch" object but is switched off via
the HSV values.
RGB+W: Used for RGB lamp with integrated white component.
The following supplementary parameters are available:
■
Switched On -> preset value:
Options: Deactivated
Activated
– Deactivated: No presets are sent when the lamp is switched on.
– Activated: The stored presets are sent when the lamp is switched on.
■
Switched Off -> RGB value 0,0,0:
Options: Deactivated
Activated
– Deactivated: No RGB values are sent when the lamp is switched off.
– Activated: The RGB values (0,0,0) are sent when the lamp is switched off. This
parameter is important for lamps that do not contain a "Switch" object.
- RGB+WW/CW: Use for RGB lamp with integrated warm white and cold white component.
The following supplementary parameters are available:
To Next Page
Loading...
