MODULE 4: POWER AND CIRCUIT BOARDS
4-30 ARCHITECT
®
RSH Service Training Guide
FOR INTERNAL USE ONLY 201532-102
1. In the table below, fill in the Voltage supplied by the RSH Card Cage to the indicated device/
component:
2. What voltages are developed and used on the SIB Board?
3. If +5VDC power was not present at the SIB which components might be affected?
4. On a ci8200
®
System which Card Cage controls the RSH?
5. What boards are contained in the RSH Card Cage on a c8000
®
Standalone System?
END OF MODULE
Component Voltage
SIB
Carrier Transport X Motor
Indexer
To Next Page
Loading...
