MODULE 2: BASIC OPERATION
ARCHITECT
®
RSH Service Training Guide 2-29
201532-102 FOR INTERNAL USE ONLY
BASIC OPERATION TROUBLESHOOTING ACTIVITY
Upon completion of this activity, you should be able to:
• Locate components
• Interpret data and use it to isolate the root cause of failure
WARNING: Potential for electric shock. Follow electrical safety practices.
WARNING: Potential Biohazard. Follow biosafety practices.
CAUTION: Class 2 Laser Radiation. Avoid eye exposure to laser light. DO
NOT STARE INTO BEAM. Follow safety practices.
Necessary Materials
•N/A
Time 60 minutes
Activity
Component Identification
Use information located in the RSH Service and Support Manual, Parts Lists section, to
perform the activity below.
1. Locate and Identify the following RSH components:
• LOCATE ONLY (Do Not Remove) the following components
Priority Bay
Routine Bay
Bay Door
Routine Bay Spring
Carrier/Tray Sensor
Bar Code Reader
Indicator Lights
Carrier Transport Assembly
Carrier Transport Bearings
Carrier Transport Pulley Assembly
Carrier Transport Motor Drive
Carrier Positioner Assembly
Carrier Positioner Carriage
Carrier Positioner Drive
(Continued)
To Next Page
Loading...
